Product Categories
Call us on
If you have any questions, please contact us
GO >>

Heatless Adsorption Compressed Air Dryer

Heatless Adsorption Compressed Air Dryer

Heatless Air Dryer, Liquid Nitrogen Generator, Compressed Air Filter manufacturer / supplier in China, offering CE PED/Asme Heatless Adsorption Compressed Air Dryer.


Basic Info

  • Model NO.: KBW-200

  • Operational Method: Continuous

  • Drying Medium: Desiccant

  • Heating Mode: No Heater

  • Flow Rate: 200m3/H

  • Pressure Dew Point: -40 Deg C

  • Voltages: 230V, 50/60 Hz

  • Vessel Standard: CE PED/Asme

  • Trademark: YUANDA

  • Origin: China

  • Structure: Adsorption Air Dryer

  • Operation Pressure: 4-16bar

  • Appearance of Dried Sample: Ball

  • Movement Way: Combined

  • Operating Pressure: 4-16bar

  • Power Consumption: 60W

  • Weight: 8430kg

  • Specification: CE


KBW series heatless adsorption dryers are designed for continuous separation of water vapour from the compressed air thus reducing the pressure dew point.KBW heatless adsorption dryer consists of two columns, filled with desiccant beds, controller with LCD display, valves, manometers, support construction and suitable filter housings with the required filter element. Adsorption takes place under pressure in the first column while the second column regenerates with a portion of already dried compressed air at ambient pressure. 



When the first column is saturated to a certain level column switch-over is carried out and the process of adsorption continues in the second column without any drop of pressure at the outlet of the dryer. Regeneration of saturated desiccant is possible because a small portion of already dry compressed air is decompressed and when expanded it becomes extremely dry. This portion of extremely dry decompressed air also called "purge air" is then fed through the saturated column in the reverse flow direction in order to remove the adsorbed water molecules from the desiccant and release them back to the ambient.

Working principle

Heatless regeneration  compressed  air  dryer  is  based  on  the 

principle of PSA, use porous desiccant to adsorb water molecules for 

compressed air. drying the 

Technical Features 

+ Imported PLC intelligent controller, stable and reliable.

+ Flange filling mouth, easy replacement. 

+ Unique endoscopy design, easy supervise for operation. 

+ Advanced pneumatic valve ensure more than one million times of 

continuous use . 

+ Special airflow diffuser to ensure the using life of the desiccant.

Technical Data

+  Working  Pressure:  0.4~1.0MPa(1.0~3.0MPa is available)

+  Dew  Point: -40℃(-40℃~-73℃MPa is available)

+  Inlet  Air  Temperature: ≤50℃

+  Regeneration  Gas  Consumption:≤12%

+ Pressure Loss:≤0. 02MP

+ Operating cycle : 4~10 min

Hot Tags: heatless adsorption compressed air dryer, China, manufacturers, suppliers, factory, exporters, seller, buy
Related Products
E-mail to us
Product Categories
To learn more, please click into each category ...
Copy Right Reserved YDGET