Call us on
If you have any questions, please contact us
GO >>
Home > News > Content

3.6 Nm3/Min Heatless Regenerative Adsorption Air Compressor Dryer KBW-3)

Basic Info
  • Model NO.: KBW-3

  • Working Pressure: 6-10 Bar

  • Inlet Temp.: <50°C

  • Air Vonnections: DN25

  • Dimensions: 605 mm (L) X 560 mm (W) X 1553 mm (H)

  • Trademark: YUANDA

  • Origin: Zhejiang

  • Capacity: 3.8 Nm/Min

  • Power: 220V/1pH/50Hz

  • Weight: 180 Kg

  • Inlet Oil Content: 0.1mg/ M3

  • Specification: ISO, CE

  • HS Code: 8414809090

Product Description

Externally heated regenerative desiccant air dryer is developed based on the successful design of the heatless type and heated type desiccant air dryers. The purge air is pre-heated before regeneration to reduce its required capacity in order to achieve an energy saving. It avoids the disadvantage of short switching period of heatless type desiccant air dryer, and at the same time it consumes much less heating energy like heated type desiccant air dryer. This is the energy saving desiccant air dryer you can rely on!

Working principle

This series of desiccant dryer incorporates the working principles of pressure swing adsorption and temperature swing adsorption. Desiccant absorbs water moisture in drying column and being regenerated with high quality dried and heated purge air in regeneration column by air thermal diffusion and high pressure difference mechanisms.

For any other requests please contact

Zhejiang Yuanda Air Separation Equipment Co.Ltd.

Add.: Gaoqiao Industrial Zone, Hangzhou, Zhejiang, China  311402


Contact: Jane Qian



Product Categories
To learn more, please click into each category ...
Copy Right Reserved YDGET