日本語
Português
عربي 
Español
Deutsch
한국어
Français
Italiano
русский 
Việt Nam
türkiye
Basic Info
Model NO.: KAD-30
Operational Method: Continuous
Drying Medium: Inactive Gas
Heating Mode: Transmission
Type of Flow: Contra-Flow
Sprayer: Pressure-Type
Max. Air Pressure: 1.2 MPa
Refrigerant: R22, R23 or Customized
Trademark: YUANDA
Origin: Hangzhou, China
Structure: Air Flow Drier
Operation Pressure: Vacuum Dryer
Appearance of Dried Sample: Pastes
Movement Way: Combined
Type of Atomization: Rotary Atomization
Air Processing Volume: 3.8 M3/Min
Max. Air Inlet Temperature: 80 Centigrade
Dew Point Temp: 2~10 Centigrade
Specification: CE, GB
Product Description
Refrigerated Air Dryers
1. Low dew point: The pressure dew point is below 5°C, and the dew point in the air outlet is below 15ºC.
2. Highly efficient pre-cooling regenerator: the air outlet temperature is increased by 10~15°C, and air inlet temperature is decreased by 8~12°C, thus to reduce the load of the evaporator.
3. Highly efficient Collision cyclone air/water separator: the air and water can be totally separated below the dew point.
4. Sensitive pressure protection switch: The protection switch will act if any error occurred and the system will stop working, thus to ensure no damage to the refrigeration Compressors.
5. Protective welding: Ensure the inner wall of the copper tube welding point not be oxidized, thus to make a clean refrigerated system and reduce the possibility of ice & dirty block.
6. Name brand components and 15%~20% enlarged condenser
7. Compact system design to make a smaller size and lighter weight
8. Serious factory inspections
Technical Parameters
1. Low dew point: The pressure dew point is below 5°C, and the dew point in the air outlet is below 15ºC.
2. Highly efficient pre-cooling regenerator: the air outlet temperature is increased by 10~15°C, and air inlet temperature is decreased by 8~12°C, thus to reduce the load of the evaporator.
3. Highly efficient Collision cyclone air/water separator: the air and water can be totally separated below the dew point.
4. Sensitive pressure protection switch: The protection switch will act if any error occurred and the system will stop working, thus to ensure no damage to the refrigeration Compressors.
5. Protective welding: Ensure the inner wall of the copper tube welding point not be oxidized, thus to make a clean refrigerated system and reduce the possibility of ice & dirty block.
6. Name brand components and 15%~20% enlarged condenser
7. Compact system design to make a smaller size and lighter weight
8. Serious factory inspections
Technical Parameters
| Model | KAD-7.5 | KAD-10 | KAD-15 | KAD-20 | KAD-30 | KAD-50 | KAD-75 | KAD-100 | KAD-150 | KAD-200 | |
| Air processing m3/min | 1.0 | 1.5 | 2.0 | 2.5 | 3.8 | 6.5 | 8.8 | 13.5 | 18 | 23 | |
| Air inlet temperature | ≤80°C | ||||||||||
| Working Pressure | ≤ 1.2Mpa | ||||||||||
| Refrigerant | R12 | R22 or R23 | |||||||||
| Power Supply | AC Power 220V 50/60Hz single phase | AC Power 220V 50/60Hz 3 phase | |||||||||
| Air outlet diameter | 3/4'' | 1'' | 1'' | 1 1/2'' | 1 1/2'' | 2'' | 21/2' | 21/2' | 3'' | 4'' | |
| Dimension mm | L | 700 | 700 | 700 | 700 | 1000 | 900 | 1250 | 1250 | 1400 | 1400 |
| W | 420 | 420 | 420 | 420 | 500 | 500 | 570 | 570 | 630 | 630 | |
| H | 710 | 710 | 710 | 760 | 850 | 900 | 1010 | 1010 | 1190 | 1240 | |
| Weight (Kg) | 35 | 42 | 50 | 60 | 80 | 90 | 100 | 115 | 120 | 280 | |
