News
Call us on
+86-571-61712588
If you have any questions, please contact us
GO >>
Home > News > Content

PED Regenerative Compressed Air Dryers (RSXW)


Product Detail

  • Model NO.: KBH

  • Structure:Air Flow Drier

  • Operational Method:Continuous

  • Operation Pressure: Atmospheric Dryer

  • Appearance of Dried Sample: Bulk

  • Heating Mode: Convective

  • Movement Way: Spraying

  • Type of Flow: Contra-Flow

  • Trademark: Yuanda

  • Specification:ISO, CE, PED

  • Origin:China

  • HS Code:8419399090

Product Description

Compressed air is polluted with dirt particles, water, oil, oil vapor and condensate. These contaminants result in high maintenance costs, premature wear, spoiled Products and the failure of control systems. This regenerative twin-tower dryer will effectively remove these contaminants.

The adsorption principle used in this design is simple, robust and flexible. Continuous drying is accomplished by the operation of 2 desiccant towers. Compressed air is dried through one tower while the other desiccant tower is being regenerated.

The regeneration heating cycle of the desiccant is accomplished using a dry
Air purge flow heated by an external electric heater. The regeneration cooling
Cycle is performed using the same flow of dry compressed air taken from the dryer outlet to ensure accurate dew point performance.

By using proven engineering technology and components, this equipment is extremely reliable.

Features:
1) Low running cost, low pressure drop and steady dew point
2) Easy to install and maintain
3) Ideal for high environmental temperatures
4) Microprocessor control
5) Suitable for a range of air compressors
6) Custom designs welcome

Specifications:
1) Constant pressure dew point: -20C, -40C
2) Rated operational pressure: 0.60 - 0.95Mpa(g)
3) Regenerative consumption: <14%
4) Inlet air temperature: <40C
5) Desiccant: Activated aluminum oxide or molecular sieve
6) Power supply: 220V AC, 50Hz
7) Pressure drop: < 0.02Mpa (working pressure:  0.7MPa)
8) Fully automatic, interlocked operation controlled by PLC on a fixed 10min time cycle
9) End connection/flange: JB/T81
 

 


Product Categories
To learn more, please click into each category ...
Copy Right Reserved YDGET